dmesg - ATI Mobility Radeon HD 4670
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-21-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 (Ubuntu 3.8.0-21.32-generic 3.8.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bdaa0fff] usable
BIOS-e820: [mem 0x00000000bdaa1000-0x00000000bdaa6fff] reserved
BIOS-e820: [mem 0x00000000bdaa7000-0x00000000bdbbafff] usable
BIOS-e820: [mem 0x00000000bdbbb000-0x00000000bdc0efff] reserved
BIOS-e820: [mem 0x00000000bdc0f000-0x00000000bdd07fff] usable
BIOS-e820: [mem 0x00000000bdd08000-0x00000000bdf0efff] reserved
BIOS-e820: [mem 0x00000000bdf0f000-0x00000000bdf17fff] usable
BIOS-e820: [mem 0x00000000bdf18000-0x00000000bdf1efff] reserved
BIOS-e820: [mem 0x00000000bdf1f000-0x00000000bdf62fff] usable
BIOS-e820: [mem 0x00000000bdf63000-0x00000000bdf9efff] ACPI NVS
BIOS-e820: [mem 0x00000000bdf9f000-0x00000000bdfe2fff] usable
BIOS-e820: [mem 0x00000000bdfe3000-0x00000000bdffefff] ACPI data
BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Dell Inc. Studio XPS 1640/0Y536R, BIOS A15 04/09/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D7FFF write-protect
D8000-DBFFF uncachable
DC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 100000000 mask F00000000 write-back
3 base 200000000 mask FC0000000 write-back
4 base 0FFE00000 mask FFFE00000 write-protect
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f7910-0x000f791f] mapped at [ffff8800000f7910]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0xbdffffff]
[mem 0x00000000-0xbdffffff] page 2M
kernel direct mapping tables up to 0xbdffffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x23fffffff]
[mem 0x100000000-0x23fffffff] page 2M
kernel direct mapping tables up to 0x23fffffff @ [mem 0xbdfdd000-0xbdfe2fff]
RAMDISK: [mem 0x34446000-0x3621afff]
ACPI: RSDP 00000000000f7860 00024 (v02 PTLTD )
ACPI: XSDT 00000000bdff7ac3 00074 (v01 DELL QA09 06040000 LTP 00000000)
ACPI: FACP 00000000bdfe7000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 00000000bdfe8000 0704F (v02 Intel CANTIGA 06040000 INTL 20050624)
ACPI: FACS 00000000bdf9efc0 00040
ACPI: HPET 00000000bdffed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 00000000bdffed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: APIC 00000000bdffed8a 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 00000000bdffedf2 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 00000000bdffee1a 00176 (v01 DELL QA09 06040000 LTP 00000000)
ACPI: OSFR 00000000bdffef90 00070 (v01 DELL DELL 06040000 ASL 00000061)
ACPI: SSDT 00000000bdfe6000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: SSDT 00000000bdfe5000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 00000000bdfe4000 0020F (v01 PmRef ApTst 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x00000000-0x23fffffff]
NODE_DATA [mem 0x23fffb000-0x23fffffff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009bfff]
node 0: [mem 0x00100000-0xbdaa0fff]
node 0: [mem 0xbdaa7000-0xbdbbafff]
node 0: [mem 0xbdc0f000-0xbdd07fff]
node 0: [mem 0xbdf0f000-0xbdf17fff]
node 0: [mem 0xbdf1f000-0xbdf62fff]
node 0: [mem 0xbdf9f000-0xbdfe2fff]
node 0: [mem 0xbdfff000-0xbdffffff]
node 0: [mem 0x100000000-0x23fffffff]
On node 0 totalpages: 2088140
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3910 pages, LIFO batch:0
DMA32 zone: 12085 pages used for memmap
DMA32 zone: 761355 pages, LIFO batch:31
Normal zone: 20480 pages used for memmap
Normal zone: 1290240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdaa1000 - 00000000bdaa7000
PM: Registered nosave memory: 00000000bdbbb000 - 00000000bdc0f000
PM: Registered nosave memory: 00000000bdd08000 - 00000000bdf0f000
PM: Registered nosave memory: 00000000bdf18000 - 00000000bdf1f000
PM: Registered nosave memory: 00000000bdf63000 - 00000000bdf9f000
PM: Registered nosave memory: 00000000bdfe3000 - 00000000bdfff000
PM: Registered nosave memory: 00000000be000000 - 0000000100000000
e820: [mem 0xbe000000-0xffffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s85056 r8192 d21440 u1048576
pcpu-alloc: s85056 r8192 d21440 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055505
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8108816k/9437184k available (7006k kernel code, 1084624k absent, 243744k reserved, 6238k data, 992k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
NR_IRQS:16640 nr_irqs:512 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2792.927 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.85 BogoMIPS (lpj=11171708)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26690 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
smpboot: Booting Node 0, Processors #1 OK
Brought up 2 CPUs
smpboot: Total of 2 processors activated (11171.70 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbdf63000-0xbdf9efff] (245760 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdf1ac20 002A7 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 002A7 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 00000000bdf18620 00575 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00575 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 00000000bdf19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT 00000000bdf19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io 0x1840-0x185f]
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xfc404800-0xfc404bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xfc400000-0xfc403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f]
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xfc404c00-0xfc404fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x18f0-0x18f7]
pci 0000:00:1f.2: reg 14: [io 0x18e4-0x18e7]
pci 0000:00:1f.2: reg 18: [io 0x18e8-0x18ef]
pci 0000:00:1f.2: reg 1c: [io 0x18e0-0x18e3]
pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18df]
pci 0000:00:1f.2: reg 24: [mem 0xfc404000-0xfc4047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
pci 0000:01:00.0: [1002:9488] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff]
pci 0000:01:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:04:00.0: [8086:4235] type 00 class 0x028000
pci 0000:04:00.0: reg 10: [mem 0xf8000000-0xf8001fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 06-07]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
pci 0000:08:00.0: [14e4:1698] type 00 class 0x020000
pci 0000:08:00.0: reg 10: [mem 0xfc000000-0xfc00ffff 64bit]
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 08]
pci 0000:00:1c.5: bridge window [mem 0xfc000000-0xfc0fffff]
pci 0000:09:01.0: [1180:0832] type 00 class 0x0c0010
pci 0000:09:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
pci 0000:09:01.0: MMC cards are now supported by standard SDHCI controller
pci 0000:09:01.0: reg 10: [mem 0xfc100000-0xfc1007ff]
pci 0000:09:01.0: supports D1 D2
pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.1: [1180:0822] type 00 class 0x080501
pci 0000:09:01.1: reg 10: [mem 0xfc100800-0xfc1008ff]
pci 0000:09:01.1: supports D1 D2
pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.2: [1180:0592] type 00 class 0x088000
pci 0000:09:01.2: reg 10: [mem 0xfc101000-0xfc1010ff]
pci 0000:09:01.2: supports D1 D2
pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.3: [1180:0852] type 00 class 0x088000
pci 0000:09:01.3: reg 10: [mem 0xfc101400-0xfc1014ff]
pci 0000:09:01.3: supports D1 D2
pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc1fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbdaa1000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdbbb000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdd08000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdf18000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdf63000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdfe3000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:03: [io 0x0400-0x047f] has been reserved
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0x0480-0x048f] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x1000-0x107f] has been reserved
system 00:03: [io 0x1180-0x11ff] has been reserved
system 00:03: [io 0x164e-0x164f] has been reserved
system 00:03: [io 0xfe00] has been reserved
system 00:03: [io 0x0900-0x097f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs ITE8708 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.5: BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0200000-0xc02000ff 64bit]
pci 0000:01:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 06-07]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 08]
pci 0000:00:1c.5: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.5: bridge window [mem 0xfc000000-0xfc0fffff]
pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 09]
pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc1fffff]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:08: resource 1 [mem 0xfc000000-0xfc0fffff]
pci_bus 0000:08: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xfc100000-0xfc1fffff]
pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:09: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:09: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:09: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:09: resource 10 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30548k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb9aa1000-0xbdaa1000] (64MB) mapped at [ffff8800b9aa1000-ffff8800bdaa0fff]
Simple Boot Flag at 0x36 set to 0x1
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1368817616.836:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 15897
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
ACPI: AC Adapter [ADP1] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (56 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (42 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ02] (55 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0xfc404800
ACPI: Battery Slot [BAT0] (battery present)
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-21-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfc404c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-21-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-21-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-21-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-21-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-21-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-21-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.8.0-21-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: da639d7d39047796a6cdf66158dce65752f170ea'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:05: setting system clock to 2013-05-17 19:06:57 UTC (1368817617)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1176k freed
Freeing unused kernel memory: 1080k freed
udevd[97]: starting version 175
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
Disabling lock debugging due to kernel taint
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs
ahci 0000:00:1f.2: setting latency timer to 64
wmi: Mapper loaded
scsi0 : ahci
PTP clock support registered
tg3.c:v3.128 (December 03, 2012)
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ACPI Warning: _BQC returned an invalid level (20121018/video-494)
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 45
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404380 irq 45
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
acpi device:02: registered as cooling_device2
ACPI: Video Device [M86] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:26:b9:04:06:5e
tg3 0000:08:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:08:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA
firewire_ohci 0000:09:01.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
mmc0: new high speed SDHC card at address 0007
mmcblk0: mmc0:0007 SD04G 3.67 GiB
mmcblk0: p1
usb 1-6: new high-speed USB device number 3 using ehci-pci
ata6: SATA link down (SStatus 0 SControl 300)
usb 1-6: New USB device found, idVendor=05ca, idProduct=18a0
usb 1-6: New USB device strings: Mfr=9, Product=2, SerialNumber=0
usb 1-6: Product: Integrated Webcam
usb 1-6: Manufacturer: CN0TX6137248798BA2N7
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102M3, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD3200BJKT-75F4T0, 11.01A11, max UDMA/133
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD3200BJKT-7 11.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
firewire_core 0000:09:01.0: created device fw0: GUID 0000000000000000, S400
usb 3-1: new full-speed USB device number 2 using uhci_hcd
vesafb: mode is 1152x864x32, linelength=4608, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011400000, using 3904k, total 3904k
Console: switching to colour frame buffer device 144x54
fb0: VESA VGA frame buffer device
usb 3-1: New USB device found, idVendor=0a5c, idProduct=4500
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: BCM2046B1
usb 3-1: Manufacturer: Broadcom
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 3 ports detected
xor: automatically using best checksumming function:
generic_sse: 10807.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
Btrfs loaded
usb 3-1.1: new full-speed USB device number 3 using uhci_hcd
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
usb 3-1.1: New USB device found, idVendor=413c, idProduct=8157
usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-1.2: new full-speed USB device number 4 using uhci_hcd
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[478]: starting version 175
usb 3-1.2: New USB device found, idVendor=413c, idProduct=8158
usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
lp: driver loaded but no devices found
input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input6
hid-generic 0003:413C:8157.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0
input: HID 413c:8158 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7
hid-generic 0003:413C:8158.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
device-mapper: multipath: version 1.5.1 loaded
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (582) terminated with status 1
ite_cir: Auto-detected model: ITE8708 CIR transceiver
ite_cir: Using model: ITE8708 CIR transceiver
ite_cir: TX-capable: 1
ite_cir: Sample period (ns): 8680
ite_cir: TX carrier frequency (Hz): 38000
ite_cir: TX duty cycle (%): 33
ite_cir: RX low carrier frequency (Hz): 0
ite_cir: RX high carrier frequency (Hz): 0
Registered IR keymap rc-rc6-mce
input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input8
rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
ite_cir: driver has been successfully loaded
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
IR Sony protocol handler initialized
[fglrx] Maximum main memory to use for locked dma buffers: 7719 MBytes.
[fglrx] vendor: 1002 device: 9488 count: 1
[fglrx] ioport: bar 1, base 0x2000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.97.2 [Nov 16 2012] with 1 minors
IR SANYO protocol handler initialized
input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input9
IR MCE Keyboard/mouse protocol handler initialized
cfg80211: Calling CRDA to update world regulatory domain
lirc_dev: IR Remote Control driver registered, major 246
rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
IR LIRC bridge handler initialized
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692
iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:04:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
Linux video capture interface: v2.00
iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
r592: driver successfully loaded
uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a0)
input: Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
r852: driver loaded successfully
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
init: failsafe main process (802) killed by TERM signal
input: Dell WMI hotkeys as /devices/virtual/input/input13
microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:04:00.0: Radio type=0x0-0x2-0x0
iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:04:00.0: Radio type=0x0-0x2-0x0
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 579772
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:08:00.0: irq 49 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: anacron main process (1224) killed by TERM signal
init: plymouth-stop pre-start process (1483) terminated with status 1
fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1487
[fglrx] Firegl kernel thread PID: 1488
[fglrx] Firegl kernel thread PID: 1489
[fglrx] IRQ 50 Enabled
[fglrx] Gart USWC size:1280 M.
[fglrx] Gart cacheable size:508 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000
[fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
systemd-timedated[2671]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
wlan0: authenticate with 00:18:e7:e7:15:0e
wlan0: send auth to 00:18:e7:e7:15:0e (try 1/3)
wlan0: send auth to 00:18:e7:e7:15:0e (try 2/3)
wlan0: authenticated
iwlwifi 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: waiting for beacon from 00:18:e7:e7:15:0e
wlan0: associate with 00:18:e7:e7:15:0e (try 1/3)
wlan0: RX AssocResp from 00:18:e7:e7:15:0e (capab=0x431 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from 00:18:e7:e7:15:0e by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:18:e7:e7:15:0e
wlan0: send auth to 00:18:e7:e7:15:0e (try 1/3)
wlan0: authenticated
iwlwifi 0000:04:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 00:18:e7:e7:15:0e (try 1/3)
wlan0: associate with 00:18:e7:e7:15:0e (try 2/3)
wlan0: associate with 00:18:e7:e7:15:0e (try 3/3)
wlan0: RX AssocResp from 00:18:e7:e7:15:0e (capab=0x431 status=0 aid=2)
wlan0: associated
systemd-timedated[4862]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
systemd-timedated[12876]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
CE: hpet increased min_delta_ns to 20113 nsec
systemd-timedated[17688]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
systemd-timedated[25038]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
totem[8617]: segfault at ffffffff ip 00007f6104212f7f sp 00007fff5c867d20 error 4 in libglib-2.0.so.0.3600.0[7f61041af000+f9000]
totem[8831]: segfault at ffffffff ip 00007f4663ccbf7f sp 00007fffbb44efa0 error 4 in libglib-2.0.so.0.3600.0[7f4663c68000+f9000]
totem[8858]: segfault at ffffffff ip 00007fc6bc2a9f7f sp 00007fffeccd9d00 error 4 in libglib-2.0.so.0.3600.0[7fc6bc246000+f9000]
totem[8882]: segfault at ffffffff ip 00007fd3bedc2f7f sp 00007fff66752940 error 4 in libglib-2.0.so.0.3600.0[7fd3bed5f000+f9000]
init: upstart-file-bridge main process (453) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (476) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (975) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
steam[12247]: segfault at 204 ip 00000000f771b8ee sp 00000000fff8d18c error 4 in ld-2.17.so[f7707000+20000]
steam[12369]: segfault at 204 ip 00000000f77b68ee sp 00000000ffd751cc error 4 in ld-2.17.so[f77a2000+20000]
systemd-timedated[17576]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
systemd-timedated[17692]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: device not accepting address 2, error -71
hub 2-0:1.0: unable to enumerate USB device on port 1
usb 6-1: new full-speed USB device number 2 using uhci_hcd
usb 6-1: not running at top speed; connect to a high speed hub
usb 6-1: New USB device found, idVendor=1949, idProduct=0004
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: Product: Amazon Kindle
usb 6-1: Manufacturer: Amazon
usb 6-1: SerialNumber: B011140714623KXL
Initializing USB Mass Storage driver...
scsi6 : usb-storage 6-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 6:0:0:0: Direct-Access Kindle Internal Storage 0100 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdc] 6754304 512-byte logical blocks: (3.45 GB/3.22 GiB)
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sdc: detected capacity change from 3458203648 to 0
usb 6-1: USB disconnect, device number 2
sd 6:0:0:0: [sdc] Synchronizing SCSI cache
sd 6:0:0:0: [sdc]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK